```markdown
How to Use Phison MPALL v3.20.00-B PS2251 RAR to Repair USB Flash Drives
If you have a corrupted or damaged USB flash drive that uses the Phison PS2251 controller, you may be able to fix it using the Phison MPALL v3.20.00-B PS2251 RAR tool. This tool is a software that can format and restore your USB flash drive to its original state.
phison mpall v3 20 00 b ps2251 rar
Download File: https://www.google.com/url?q=https%3A%2F%2Ffancli.com%2F2tIuz2&sa=D&sntz=1&usg=AOvVaw03El4HE4hIpTPXh8U04Fmv
In this article, we will show you how to use the Phison MPALL v3.20.00-B PS2251 RAR tool to repair your USB flash drive. But before we start, you need to make sure that your USB flash drive is compatible with the tool. You can check the compatibility by using a program called ChipGenius, which can detect the model and vendor of your USB flash drive.
Step 1: Download and Extract the Phison MPALL v3.20.00-B PS2251 RAR Tool
The first step is to download the Phison MPALL v3.20.00-B PS2251 RAR tool from this link: https://www.mediafire.com/file/6qyq0x8g9f8z6f9/Phison_MPALL_v3.20.00-B_PS2251.rar/file.
After downloading the file, you need to extract it using a program like WinRAR or 7-Zip. You will get a folder named \"Phison MPALL v3.20.00-B PS2251\" that contains several files and subfolders.
Step 2: Run the Phison MPALL v3.20.00-B PS2251 Tool
The next step is to run the Phison MPALL v3.20.00-B PS2251 tool as an administrator. To do this, right-click on the file named \"MPALL_F1_7F00_DL07_v372_0B.exe\" and select \"Run as administrator\".
A window will pop up asking you to select the language of the tool. Choose your preferred language and click \"OK\". Then, another window will appear with the main interface of the tool.
Step 3: Configure the Settings of the Phison MPALL v3.20.00-B PS2251 Tool
The third step is to configure the settings of the Phison MPALL v3.20.00-B PS2251 tool according to your USB flash drive specifications and preferences. Here are some of the settings that you need to adjust:
Under the \"Device\" tab, make sure that your USB flash drive is detected and selected in the drop-down menu.
Under the \"Setting\" tab, check the box that says \"Auto ISP\". This will enable the tool to automatically detect and update the firmware of your USB flash drive.
Under the \"Setting\" tab, click on the button that says \"Load FW\". This will open a window where you can browse and select the firmware file for your USB flash drive. The firmware file should be located in the subfolder named \"FW\" inside the main folder of the tool.
Under the \"Setting\" tab, click on the button that says \"Load Parameter\". This will open a window where you can browse and select the parameter file for your USB flash drive. The parameter file should be located in the subfolder named \"Parameter\" inside the main folder of the tool.
Under the \"Setting\" tab, check or uncheck the boxes that say \"Low Format\", \"Do ISP\", and \"Erase Data\". These options will determine whether you want to format your USB flash drive, update its firmware, and erase its data respectively.
Under the \"Setting\" tab, click on the button that says \"Set Config\". This will apply your settings to the tool.
Step 4: Start the Repair Process of Your USB Flash Drive
The final step is to c481cea774